The Ebara Matrix B602 pumps are fitted with a full Variable Frequency Drive (VFD) that varies the frequency of the motor in order to change the speed in relation to demand. Do not confuse with Variable Speed Drives (VSD) as there vary the voltage.
They also have the advantage over through put devices like the Speedmatic (Hydromatic) as there are no seals to fail and allow the product into the drive electrics. They can also operate with liquid temperatures up to 110° C instead of the 40° C of the throughput devices.
The units are supplied fully assembled and all pre-set to 3 bar pressure and on the correctly sized pipework it will produce 100 L/Min at the 3 bar
The maximum flow is 130 L/Min and the maximum pressure is 4.5 Bar
All other models can be supplied with the B602 Variable Frequency Drives
Please call 0161 428 0133 for any advice
The Part number is different
The minimum pressure these pumps require is 2 meter's, if you do not have 2 meter’s differential from water level to discharge point,or a minimum of 14 meter's horizontal run, then use a 1" bore discharge hose or your motor will burn out
What is the lowest head pressure
Part numbers have changed to harmonise along with design changes. The part number stated is the current one in use, there are different numbers for OEM products also, if you have any doubts please advise the part number and we will confirm.
Discounts
Further quantity discounts are available for this product range, call the office for details 0161 428 0133
UK mainland delivery by next working day courier, please allow 2 to 3 days for assembly.