Ebara Pumps JESXM_NIWA_110_Presscomfort
	PRESSCOMFORT is an automatic electronic device, designed to regulate the functioning of the electric pumps without using expansion tanks. Ther pump automatic starts and stop when a tap or valve connected to the installation opens or closes respectively. When the pump is started, it continues until any tap connected remains open, transmitting the requested flow rate at constant pressure to the network. If there is no liquid at the suction, the pump stops automatically. PRESSCOMFORT allows: -manual restore (RESET key) -automatic restore after 1, 6, 12, 24 hours. When a pressure exceeding (1.5 bar) for pump start-up, PRESSCOMFORT is restored automatically. TECHNICAL DETAILS Automatic regulation Incorporated non-return valve Functioning indicator TECHNICAL DATA Maximum temperature of the water: 60° C Maximum flow rate: 10,000 I/h Start-up pressure: 1.5 -2.5 bar Maximum use pressure: lObar Power supply voltage: 220/240V -50/60 Hz Maximum current intensity: 10(6)A IP65 Protection rating G 1 connections (pump and outlet side)